You'll Be Unable To Guess Ghost Vehicle Immobiliser's Benefits

· 6 min read
You'll Be Unable To Guess Ghost Vehicle Immobiliser's Benefits

Protect Your Vehicle With a Ghost Vehicle Immobiliser

Ghost immobilisers shield your car from car thieves without the need for an additional key. These systems aren't detected by radio scanners and are weatherproof.

Both Autowatch Ghost and CAN Phantom are fitted with an emergency PIN code override for use in the event that the device is removed from the vehicle. They have been verified by TASSA (Tracking and Aftermarket Security System Association). They could lower your insurance premium.

Protects your vehicle from key to cloning, ECU swapping and other illegal activities

With car thefts on the rise, it's important to ensure that your vehicle is protected against determined thieves who are constantly developing new methods to evade security systems. Whether that be cutting wires, using diagnostic scan tools or copying key fobs. One of the most effective ways to do this is to install a ghost vehicle immobiliser installed.

The reason this modern-day device is so efficient is that it does not rely on alarms or the use of a key fob for its work. It is connected to your ECU and CAN network to stop the car from beginning. This makes it more difficult for thieves to steal even if they have your keys to steal your vehicle.


The system makes use of buttons on the steering wheel, console or door panels to create an individual pin code sequence, which can be as long as 20 presses. This code must be entered before your car starts. The code is unique and can be changed at any time, making it impossible to deceive or break.

In addition to the pin code option, you may also opt to include the service mode that allows your car to start and drive without the need for a PIN code. This can be used in the event of an emergency situation, for instance when your car needs to be repaired or taken to the garage.

Another great feature of the system is that it can be paired with an automatic call alerting you when your vehicle has been damaged or stolen. It is possible to configure the system to send you an email or text message and can also be linked to an GPS tracking device.

Certain thieves have used jamming devices or spoofing techniques to bypass the Ghost system. However, this is easily thwarted by modern anti-jamming technology and vigilant monitoring of your vehicle.

Finds out if there is a an attempt to tamper with

The Ghost is designed in a way that it can be concealed inside the wiring harness of your vehicle and make it difficult for thieves to detect. It communicates to the vehicle's CAN network in order to stop key cloning and ECU swapping. However, it is undetectable by using keyfobs or LED indicators. The device is also tamper-proof and cannot be altered by wire cutters or other tools. Its compact size makes it easy to place anywhere inside the car, even inside the engine. It can be paired up with an GPS tracker to give an additional layer of security.

It can also detect the presence of other car immobilisers or tampering, meaning that it will take longer for thieves to steal your vehicle. This makes it an effective tool to fight vehicle theft, particularly for high-value vehicles with costly modifications. It can be linked to an iPhone app that can allow you to arm and disarm the device from a distance. You can receive alerts via phone in the event that someone attempts to steal or alter your vehicle.

Many people install an immobiliser in their vehicle to increase the security it provides. The system can prevent key cloning, ECU swapping, and even relay attacks. It can be paired with a GPS tracker to boost its effectiveness.  ghost immobiliser cost  can also be programmed to shut down the engine of your vehicle in the event that it is moved away from its usual position.

Some drivers have reported issues with their stop/start feature after installing the ghost, but these are typically isolated cases and don't necessarily mean there is an issue with the immobiliser. It is crucial to confirm that the device has been installed by a reputable company and is compatible with your vehicle prior to purchasing it.

The TASSA ghost II immobiliser, which is the most recent technology in vehicle security, can protect your car against key cloning and ECU swapping. It can be linked to an iPhone application that allows you to arm and disarm it remotely as well as monitor your vehicle's health status. It is covered by a five-year guarantee and can be connected to your insurance policy to provide you with extra peace of mind.

Detects relay attacks

There are a variety of security options that can be used to deter vehicle theft. Particularly designed locks as well as tracking devices and ghost immobilisers are all readily available. These systems detect the signal coming from the key fob, and block the engine from being started until a PIN code is entered. They also shield the vehicle from hacking and cloning, making them an effective security measure against determined thieves. There are several ways criminals attempt to circumvent the system.

Relay attacks are a typical method used to disable vehicle immobilisers. This technique involves two thieves working together, one of whom stands close to the car with a device that is able to detect the key fob's signal. The signal is then transmitted to a device close to the engine control device. This tricked system into thinking that the key fob was in the vicinity, allowing the thieves to start their vehicle.

The Autowatch Ghost Immobiliser, a CAN-based advanced system, was designed to stop these types of attacks. It works with the vehicle's CAN (Controller Area Network) system and seamlessly into the existing OEM security system. It works with a wide range of vehicles and works invisibly to stop ECU hacking. It is a cost-effective replacement for the original security system.

Contrary to other security devices the Ghost Immobiliser does not use LED indicators or key-fobs. Instead, it is placed in the vehicle's wiring and is therefore unable to be recognized by thieves. The device is also tamper-proof and will not be activated until it receives a particular PIN number from the vehicle's owner. This makes it an ideal option for protecting vehicles from being cloned and ECU hacking.

The choice between the Ghost Immobiliser or the Relay Immobiliser is based on your personal preferences as well as the level of security you desire for your vehicle. The Ghost Immobiliser provides high security and undetectable installation, while the Relay Immobiliser is more user-friendly but is also susceptible to a few vulnerabilities. It's entirely up to you and your requirements. Both are excellent options to safeguard your vehicle from theft.

Detects CAN bypass

The Autowatch Ghost immobiliser is a market-leading device that shields vehicles from hacking, key cloning and ECU swapping. The device is able to hide from thieves by using the vehicle's own CAN network, and doesn't require additional wiring. It also does not emit any signals that could be detected using scanning technology, which makes it an extremely effective device against modern methods of theft. It can be combined with GPS tracking devices, physical locks, and other security systems to create an effective defense against theft.

The Ghost is a sophisticated immobiliser that can be used to safeguard the most expensive vehicles. It prevents the vehicle from starting until a different PIN code is entered, along with the regular key fob. This makes it harder for thieves to steal your vehicle and discourage them from doing so in the first place. It is especially beneficial for vehicles that have been built by a specialist or are expensive models.

It is compatible with a variety of vehicles from the major manufacturers and is compatible with most aftermarket components. The device can be installed by a professional and is typically hidden in the engine bay or under the bonnet of the car. It is weatherproof and doesn't require any modifications to the wiring or signalling systems. It's the ideal method to safeguard your pride and joy.

The Ghost's valet mode allows you to drive your car as it is being serviced, or towed for repairs. This can be set with a pin code or an override driver fob you carry in your vehicle. It is easy to change back to normal mode if you need to restart your car.

Another advantage of the Ghost is that it can't be detected by diagnostic tools or listened to with an Stethoscope. This is because the Ghost does not transmit any radio frequency signals, like other security systems. It utilizes the vehicle's CAN data networks to stop the engine from running and can only be activated with a the unique PIN code.